ViewSonic PJD5533W, PJD5134 warranty Magnifying and searching for details, Correcting keystone

Page 32

Correcting keystone

Keystoning refers to the situation where the projected image is noticeably wider at either the top or bottom. It occurs when the projector is not perpendicular to the screen.

To correct this, besides adjusting the height of the projector, you will need to manually correct it following one of these steps.

Using the remote control

Press / on the projector or remote control to

 

 

 

 

 

 

display the Keystone correction page. Press

to

 

 

 

 

 

 

correct keystoning at the top of the image. Press

 

 

 

 

 

 

 

to correct keystoning at the bottom of the image.

 

 

 

 

 

 

/

 

Press /

 

Press

 

Using the OSD menu

1.Press MENU/EXIT on the projector or Menu on the remote control and then press

/ until the DISPLAY menu is highlighted.

2.Press to highlight Keystone and press MODE/ENTER on the projector or Enter on the remote control. The Keystone correction page is displayed.

3.Press to correct keystoning at the top of the image or press to correct keystoning at the bottom of the image.

Magnifying and searching for details

If you need to find the details on the projected picture, magnify the picture. Use the direction arrow keys for navigating the picture.

Using the remote control

1.Press Magnify on the remote control to display the Zoom bar.

2.Press repeatedly to magnify the picture to a desired size.

3.To navigate the picture, press MODE/ENTER on the projector or Enter on the remote control to switch to the paning mode and press the directional arrows

( , , , ) to navigate the picture.

4.To reduce size of the picture, press MODE/ENTER on the projector or Enter on the remote control to switch back to the zoom in/out functionality, and press AUTO/Auto

Sync to restore the picture to its original size. You can also press repeatedly until it is restored to the original size.

Using the OSD menu

1.Press MENU/EXIT on the projector or Menu on the remote control and then press

/ until the DISPLAY menu is highlighted.

2.Press to highlight Zoom and press MODE/ENTER on the projector or Enter on the remote control. The Zoom bar is displayed.

3.Repeat steps 2-4 in the section of Using the remote control above.

The picture can only be navigated after the picture is magnified. You can further magnify the picture while searching for details.

27

Image 32
Contents PJD5132/PJD5232L/PJD5134 PJD5234L/PJD5533w DLP Projector Compliance Information Important Safety Instructions Declaration of RoHS2 Compliance Copyright Information Table of contents Important safety instructions Safety InstructionsSafety instructions for ceiling mounting of the projector Projector features IntroductionShipping contents Rear/lower side Projector exterior viewFront/upper side Controls and functions ProjectorRemote control Color Mode Volume keys +Timer MagnifyUsing the remote mouse control Set the input signal to D-Sub / Comp , D-Sub / Comp or HdmiReplacing the remote control batteries Positioning your projector Choosing a locationFront Table Front CeilingImage on a 43 screen Projection dimensionsPJD5132/PJD5232L/PJD5134/PJD5234L PJD5533w Connection Connecting a computer or monitor Connecting a computerConnecting a monitor To connect the projector to a notebook or desktop computerConnecting Video source devices Connecting audioBest video quality Better video qualityConnecting an Hdmi device Connecting a Component Video source deviceTo connect the projector to an Hdmi device To connect the projector to a Component Video source deviceConnecting an S-Video source device Connecting a composite Video source deviceTo connect the projector to an S-Video source device To connect the projector to a composite Video source deviceOperation Starting up the projectorBelow is the overview of the OSD menu Using the menusUse / to highlight the System Setting Basic menu If you forget the password Utilizing the password functionSetting a password Entering the password recall procedure Changing the passwordDisabling the password function Switching input signal Changing Hdmi input settingsAdjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image clarityMagnifying and searching for details Correcting keystoneTo correct keystoning at the bottom of the image To navigate the pictureSelecting the aspect ratio About the aspect ratio Picture Selecting a picture mode Picture modes for different types of signalsPC input signals D-Sub / Comp /2 analog RGB Optimizing the imageUsing Screen Color Fine-tuning the image quality in user modesSetting the User 1/User 2 mode Go to the Picture Color Mode menuAdjusting Brightness Adjusting ContrastAdjusting Color Adjusting TintAbout color temperatures To adjust the settingsColor Management T4 Makes images appear reddish whiteSetting the presentation timer To cancel the timer, perform the following stepsHiding the image Locking control keysFreezing the image Operating in a high altitude environmentUsing the CEC function Using the 3D functionsTo highlight High Altitude Mode Go to the System Setting Basic CEC menuUsing the projector in standby mode Power SavingActive Audio Out Quick Power OffShutting down the projector Menu operation Menu systemSystem System Setting Advanced Color System Description of each menu Color Mode TemperatureSave Settings ReferenceTimer Quick AutoSearch Hdmi FormatAuto Power SettingsLanguage ProjectorAudio Settings Mute High AltitudeClosed CaptionReset Settings PresentationSecurity RemoteMaintenance Care of the projectorSetting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Remove and dispose of the lamp protection filmLoosen the screw that secures the lamp Ensure the handle is fully laid flat and locked in placeAfter the startup logo, open the On-Screen Display OSD menu Resetting the lamp timerRestart the projector Indicators Power eventsLight Status & Description Lamp eventsTroubleshooting Cause RemedySpecifications Projector specificationsOutput terminal Control terminalEnvironmental Requirements RS-232 serial control Pin xMm W x 84.4 mm H x 221 mm D Excluding extrusions DimensionsCeiling mount installation Timing chart Supported timing for PC inputSupported timing for Component-YPbPrinput Copyright information CopyrightCode a AppendixIR control table Pin assignment for this two end RS232 command tableCode B RS232 command table InterfaceFront Table Color Hdmi Range 0x06 0x14 0x00 0x04 0x00 0x34 0x15 0x00 0x00 Customer Support Limited Warranty How to get service Mexico Limited Warranty VSCTEMP2006

PJD5533W, PJD5134 specifications

The ViewSonic PJD5134 and PJD5533W projectors are impressive options for both home and office environments, delivering high-quality visual performance with practical features that cater to various projection needs.

The ViewSonic PJD5134 is particularly renowned for its portability and versatility, suitable for meeting rooms, classrooms, and even home entertainment. It boasts an SVGA resolution of 800x600 pixels, making it ideal for standard presentations and videos. With a brightness of 3,000 ANSI lumens, the PJD5134 ensures clear visibility in various lighting conditions. The lamp life of up to 10,000 hours further enhances its appeal, reducing maintenance costs and increasing convenience.

One of the standout features of the PJD5134 is its extensive connectivity options. It includes HDMI, VGA, and composite video inputs, allowing users to connect a variety of devices, including laptops, tablets, and DVD players. The integrated speaker provides adequate audio output for small to mid-sized rooms without the need for additional sound equipment. Additionally, the projector's lightweight design and compact size make it easy to transport, making it an excellent choice for on-the-go presentations.

On the other hand, the ViewSonic PJD5533W is designed for users seeking enhanced resolution and superior image quality. This projector features a WXGA resolution of 1280x800 pixels, providing a wider aspect ratio suitable for displaying HD content and more detailed images. With a brightness of 3,500 ANSI lumens, the PJD5533W excels in brightly lit environments, ensuring that presentations remain vivid and engaging.

The PJD5533W incorporates advanced DLP technology, known for its excellent color accuracy and sharpness. It also supports a 3D-ready feature, allowing users to engage audiences with immersive content. This projector offers multiple connectivity options, including HDMI, making it easy to connect to modern devices. Furthermore, the built-in speaker and high durability make the PJD5533W a robust solution for both educational and professional settings.

In terms of user-friendly features, both models come equipped with eco-friendly functionalities, such as an energy-saving mode that reduces power consumption. This not only extends the lifespan of the lamp but also contributes to lower overall operating costs.

In summary, the ViewSonic PJD5134 and PJD5533W are excellent projectors that cater to different user needs, from basic presentations to high-quality image projection. With their compelling features, robust performance, and reliable technologies, they stand out as valuable tools for any professional or educational setting.