Classe Audio CA-3200 owner manual Extraordinary longevity Robust protection

Page 10

ENGLISH

extraordinary longevity

robust protection

10

Another benefit of having worked with highly refined circuit designs so extensively over many years is that we have vast experience in what works well over the long term.

By using only the highest quality parts to begin with, and then using them in an informed way as a result of both accelerated aging experiments and actual long- term experience, we are able to design and manufacture products which we are confident will stand the test of time.

We are confident that your new Classé product will give you many years of trouble-free reliability and musical enjoyment, just as previous Classé products have given their owners.

Finally, your new Classé amplifier incorporates a variety of protection circuits, all designed to protect both the amplifier and your loudspeakers against dangerous fault conditions. Significantly, these protection circuits do not intrude upon

or limit the normal performance of the amplifier; rather, they simply put the amplifier into protection mode when confronted with abnormal conditions. These conditions include:

output overload

DC offset

AC mains voltage (outside of normal tolerances)

excessive operating temperatures

If any of the first three conditions occurs on either channel (any of which might harm either your amplifier or possibly your loudspeakers), the amplifier will immediately go into protection mode. In such a case, a Channel LED indicator will blink red, indicating the channel with the fault, and the sound will be muted until the fault can be righted.

If the fault is not channel-related, e.g. AC mains voltage out of range, the Standby LED will blink. In all cases, the unit will need to be re-started once the cause of the fault condition has been rectified.

Image 10
Contents English Risk of Electric Shock Do not Open Important Safety Instructions Contents Word about installation Welcome to the Classé familyUnpacking and Placement Unpacking your amplifier Placement VentilationCustom installations Serial number Operating voltageWarm up/break-in period Please read this manual… Special Design Features Extraordinary longevity Robust protection Front Panel Standby button & LED indicatorOff + Channel LED on Mode button Channel status LED indicatorsSelect button Rear Panel Balanced XLR InputSingle-Ended RCA Input Speaker OutputsClassé can Bus Control Ports IR Input and OutputAC Mains Input RS-232 Control Port This DB-9 connector has two purposesDC Trigger Input and Output AC Mains FuseMains. Do not attempt to open any portion of the amplifier’s Initial Setup Configure your amplifierMake your preamp connections Make your speaker connectionsCare and Maintenance Double-check all your connectionsNo sound, and one or more Channel LEDs is blinking red TroubleshootingNo sound, and no Channel LED is lit Amplifier keeps shutting offAC mains fuse is blown Specifications NE Jamais Exposer CET Appareil À LA Pluie OU L’HUMIDITÉ Importantes instructions concernant la sécurité Sommaire Bienvenue dans la famille Classé Déballage et installation Installation VentilationNuméro de série Enregistrez votre achat Tension d’alimentationFrançais Caractéristiques particulières de la conception Fiabilité extraordinaire Protection totale Face avant Touche de mise en veille Standby et diode LED indicatriceTouche de sélection Select Touche ModeDiodes indicatrices LED des canaux Face arrière Entrée symétrique XLREntrée asymétrique RCA Sorties enceintes acoustiques SpeakersPrises de commande Classé can Bus Entrée et sortie IR infrarougePrise d’alimentation secteur AC Mains Entrée et sortie commutation TriggerFusible d’alimentation secteur AC Mains Fuse Français Réglage initial Configurez votre amplificateurConfiguration de l’allumage de l’amplificateur Entretien & Maintenance Vérifiez deux fois toutes les connexionsPas de son, et les diodes LED des canaux ne s’allument pas Dysfonctionnements’amplificateur reste éteint Le fusible d’alimentation secteur a fondu Spécifications Dimensions Page V1.9 110405

CA-3200 specifications

The Classe Audio CA-3200 is a high-performance power amplifier designed for audio enthusiasts seeking exceptional sound quality and robust power. It exemplifies Classe's commitment to precision engineering and sophisticated technology, making it a standout component in any high-fidelity audio system.

The CA-3200 boasts a powerful output of 200 Watts per channel into 8 ohms, and it doubles that to 400 Watts into 4 ohms, ensuring ample power to drive a wide range of loudspeakers with authority and detail. This amplifier employs a Class AB design, which combines the best attributes of Class A and Class B amplification. The result is a warm, rich sound that maintains clarity and dynamics, even at high volume levels.

One of the unique features of the CA-3200 is its high-quality, low-noise power supply. This power supply includes an oversized transformer and large storage capacitors, providing the necessary reserves for transient peaks. This design minimizes noise and ensures that the amplifier delivers clean power without distortion, whether during soft passages or explosive musical moments.

Classe has implemented a custom-designed output stage that utilizes fully complementary circuitry. This innovation helps to eliminate crossover distortion, resulting in an accurate reproduction of the audio signal. Additionally, the CA-3200 features advanced thermal management technology, including extensive heat-sinking and forced-air cooling. This ensures that the amplifier remains cool and reliable during extended use, even in demanding environments.

The architectural design of the CA-3200 matches its performance capabilities. The chassis is constructed from high-quality materials, providing both aesthetic appeal and structural integrity. The front panel features visually expressive meters that allow users to monitor power levels easily, while the rear panel provides balanced and unbalanced input options, increasing flexibility in setups.

Furthermore, the CA-3200 is designed for easy integration into existing systems, offering a variety of control options, including trigger inputs and RS-232 connectivity for automation and remote control purposes.

In summary, the Classe Audio CA-3200 is an exemplary power amplifier that combines significant power output, advanced technologies, and meticulous craftsmanship. Its ability to deliver pristine audio performance while offering versatility makes it a compelling choice for both audiophiles and casual listeners alike, ensuring that it meets the demands of modern audio systems with ease.