Select button, Channel status LED indicators

ENGLISH

Caution!

Also, it is a good practice to physically disconnect any and all valuable electronics from the AC mains during electrical storms, as a lightning strike anywhere near your home can put a tremendous surge on the AC mains that can easily damage any piece of electronics, no matter how well designed and protected. The best protection in the case of severe electrical storms is to simply remove the electronics from any connection with the power grid.

2Select button

The Select button is used (along with the Mode button) when conﬁguring the ampliﬁer for either balanced or single-ended operation. It is also used when conﬁguring the turn-on delay or ampliﬁer number for an ampliﬁer connected to a Classé preampliﬁer by the DC Trigger or CAN Bus control systems.

3Channel status LED indicators

Each ampliﬁer channel has two Channel LED indicators. They are used to indicate the use of either balanced (XLR) or single-ended (RCA) inputs for that channel.

These indicators are also used to indicate fault conditions in your ampliﬁer, should any ever arise. If a channel’s LED indicators blink red, there is a problem in that particular channel. If all the Channel LEDs are blinking red, there may be a systemic problem that is not speciﬁc to a particular channel.

If you see any Channel LED Indicator blinking red, please disconnect the ampliﬁer from the AC mains immediately and check that all external connections are cleanly made and secure. If the AC mains are not easily accessible, you can press and hold the Standby button for three seconds to reset the ampliﬁer. If no fault is immediately obvious, please call your authorized Classé dealer for assistance.

4Mode button

The Mode button is used (along with the Select button) when conﬁguring the ampliﬁer for either balanced or single-ended operation. It is also used when conﬁguring the turn-on delay and ampliﬁer number of the ampliﬁer when it is connected to a Classé preampliﬁer by the CAN Bus communications or Trigger systems.

CA-3200 specifications

The Classe Audio CA-3200 is a high-performance power amplifier designed for audio enthusiasts seeking exceptional sound quality and robust power. It exemplifies Classe's commitment to precision engineering and sophisticated technology, making it a standout component in any high-fidelity audio system.

The CA-3200 boasts a powerful output of 200 Watts per channel into 8 ohms, and it doubles that to 400 Watts into 4 ohms, ensuring ample power to drive a wide range of loudspeakers with authority and detail. This amplifier employs a Class AB design, which combines the best attributes of Class A and Class B amplification. The result is a warm, rich sound that maintains clarity and dynamics, even at high volume levels.

One of the unique features of the CA-3200 is its high-quality, low-noise power supply. This power supply includes an oversized transformer and large storage capacitors, providing the necessary reserves for transient peaks. This design minimizes noise and ensures that the amplifier delivers clean power without distortion, whether during soft passages or explosive musical moments.

Classe has implemented a custom-designed output stage that utilizes fully complementary circuitry. This innovation helps to eliminate crossover distortion, resulting in an accurate reproduction of the audio signal. Additionally, the CA-3200 features advanced thermal management technology, including extensive heat-sinking and forced-air cooling. This ensures that the amplifier remains cool and reliable during extended use, even in demanding environments.

The architectural design of the CA-3200 matches its performance capabilities. The chassis is constructed from high-quality materials, providing both aesthetic appeal and structural integrity. The front panel features visually expressive meters that allow users to monitor power levels easily, while the rear panel provides balanced and unbalanced input options, increasing flexibility in setups.

Furthermore, the CA-3200 is designed for easy integration into existing systems, offering a variety of control options, including trigger inputs and RS-232 connectivity for automation and remote control purposes.

In summary, the Classe Audio CA-3200 is an exemplary power amplifier that combines significant power output, advanced technologies, and meticulous craftsmanship. Its ability to deliver pristine audio performance while offering versatility makes it a compelling choice for both audiophiles and casual listeners alike, ensuring that it meets the demands of modern audio systems with ease.