Initial Setup, Conﬁgure your ampliﬁer

ENGLISH

Important:

conﬁguring balanced/ single-ended operation

Initial Setup

Your new Classé ampliﬁer is quite simple to set up and enjoy. Please follow the steps outlined below in order to safely set up and use your new ampliﬁer.

The AC mains connection should be the last connection you make on your new power ampliﬁer. In addition, it is always a good idea to power up your power ampliﬁer(s) last, after everything else has been powered up and has stabilized. .

Conversely, it is good practice to power the ampliﬁer(s) down ﬁrst when shutting down the system, as this prevents any transients from other components from getting through to your loudspeakers.

1.Unpack everything according to the included instructions. Be careful when doing so, as this ampliﬁer is quite heavy.

2.Place your ampliﬁer (be sure to read “Unpacking and Placement”) and connect it to the AC mains.

This includes deciding on the location, making sure you have adequate ventilation, and adequate clearance for all the wires behind the ampliﬁer. Once accomplished, connect the ampliﬁer directly to the AC mains. Do not use extension cords, as most are not suitable for the current sometimes required by your ampliﬁer.

3.Conﬁgure your ampliﬁer.

The Select and Mode buttons are used when conﬁguring your ampliﬁer for how you would like it to operate.

While in standby, pressing the Select button will cause some of the Chan- nel LEDs to light up, indicating how the ampliﬁer is currently conﬁgured (either balanced or single-ended) for each channel.

One of the Channel LED indicators will be blinking, indicating that you may select either balanced or single-ended operation for that particular channel. Press the Mode button to toggle between either the balanced mode or the single-ended mode of operation, indicated by one of the two Channel LEDs remaining on.

Press the Select button again to select the next channel, and repeat the pro- cess until the ampliﬁer is conﬁgured as you desire. To ﬁnish, continue to press and release the Select button until all the Channel LEDs are off.

Make sure you conﬁgure the ampliﬁer to use the type of input connection you will be using for each channel. You may safely use any combination of single-ended and balanced input connections your system requires.

CA-3200 specifications

The Classe Audio CA-3200 is a high-performance power amplifier designed for audio enthusiasts seeking exceptional sound quality and robust power. It exemplifies Classe's commitment to precision engineering and sophisticated technology, making it a standout component in any high-fidelity audio system.

The CA-3200 boasts a powerful output of 200 Watts per channel into 8 ohms, and it doubles that to 400 Watts into 4 ohms, ensuring ample power to drive a wide range of loudspeakers with authority and detail. This amplifier employs a Class AB design, which combines the best attributes of Class A and Class B amplification. The result is a warm, rich sound that maintains clarity and dynamics, even at high volume levels.

One of the unique features of the CA-3200 is its high-quality, low-noise power supply. This power supply includes an oversized transformer and large storage capacitors, providing the necessary reserves for transient peaks. This design minimizes noise and ensures that the amplifier delivers clean power without distortion, whether during soft passages or explosive musical moments.

Classe has implemented a custom-designed output stage that utilizes fully complementary circuitry. This innovation helps to eliminate crossover distortion, resulting in an accurate reproduction of the audio signal. Additionally, the CA-3200 features advanced thermal management technology, including extensive heat-sinking and forced-air cooling. This ensures that the amplifier remains cool and reliable during extended use, even in demanding environments.

The architectural design of the CA-3200 matches its performance capabilities. The chassis is constructed from high-quality materials, providing both aesthetic appeal and structural integrity. The front panel features visually expressive meters that allow users to monitor power levels easily, while the rear panel provides balanced and unbalanced input options, increasing flexibility in setups.

Furthermore, the CA-3200 is designed for easy integration into existing systems, offering a variety of control options, including trigger inputs and RS-232 connectivity for automation and remote control purposes.

In summary, the Classe Audio CA-3200 is an exemplary power amplifier that combines significant power output, advanced technologies, and meticulous craftsmanship. Its ability to deliver pristine audio performance while offering versatility makes it a compelling choice for both audiophiles and casual listeners alike, ensuring that it meets the demands of modern audio systems with ease.