Important Safety Instructions

Caution:

Please read and observe all warnings and instructions in this owner’s manual and all those marked on the unit. Retain this owner’s manual for future reference.

1.Do not attempt to service this product yourself. Do not open the cover for any reason. There are no user-serviceable parts inside. An open unit, particularly if it is still connected to an AC source, presents a potentially lethal shock hazard. Refer all questions to authorized service personnel only.

2.To prevent ﬁre or shock hazard, do not expose the unit to water or moisture. If a liquid does enter your component, immediately disconnect it from the AC mains and take it to your Classé dealer for a thorough check-up.

3.Do not place your component near any heat-producing device such as a radiator, stove, etc., Keep it away from direct sunlight.

4.Connect your component only to an AC source of the proper voltage. The shipping container and the rear panel serial number tag will indicate the proper voltage. Use of any other voltage may damage the unit and void the warranty.

5.AC cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Do not stress the AC cord by stretching it to reach a plug. If damage does occur to the AC cord, take it to your Classé dealer for a thorough check-up and proper repair or replacement.

6.If your component will be out of use for an extended period of time (vacation, etc. ), you may wish to unplug the power cord from the AC source to prevent any chance of problems from a voltage surge or lightning strike.

7.NEVER wet the inside of this product with any liquid.

8.NEVER pour or spill liquids directly onto this unit.

9.NEVER block air ﬂow through ventilation slots or heatsinks.

10.NEVER bypass any fuse.

11.NEVER replace any fuse with a value or type other than that speciﬁed.

12.NEVER attempt to repair this product. If a problem occurs, contact your Classé dealer.

13.NEVER expose this product to extremely high or low temperatures.

14.NEVER operate this product in an explosive atmosphere.

15.ALWAYS unplug sensitive electronic equipment during lightning storms.

Please record the serial number of your new Classé component here for future reference.

Serial #: __________________

ENGLISH

CA-3200 specifications

The Classe Audio CA-3200 is a high-performance power amplifier designed for audio enthusiasts seeking exceptional sound quality and robust power. It exemplifies Classe's commitment to precision engineering and sophisticated technology, making it a standout component in any high-fidelity audio system.

The CA-3200 boasts a powerful output of 200 Watts per channel into 8 ohms, and it doubles that to 400 Watts into 4 ohms, ensuring ample power to drive a wide range of loudspeakers with authority and detail. This amplifier employs a Class AB design, which combines the best attributes of Class A and Class B amplification. The result is a warm, rich sound that maintains clarity and dynamics, even at high volume levels.

One of the unique features of the CA-3200 is its high-quality, low-noise power supply. This power supply includes an oversized transformer and large storage capacitors, providing the necessary reserves for transient peaks. This design minimizes noise and ensures that the amplifier delivers clean power without distortion, whether during soft passages or explosive musical moments.

Classe has implemented a custom-designed output stage that utilizes fully complementary circuitry. This innovation helps to eliminate crossover distortion, resulting in an accurate reproduction of the audio signal. Additionally, the CA-3200 features advanced thermal management technology, including extensive heat-sinking and forced-air cooling. This ensures that the amplifier remains cool and reliable during extended use, even in demanding environments.

The architectural design of the CA-3200 matches its performance capabilities. The chassis is constructed from high-quality materials, providing both aesthetic appeal and structural integrity. The front panel features visually expressive meters that allow users to monitor power levels easily, while the rear panel provides balanced and unbalanced input options, increasing flexibility in setups.

Furthermore, the CA-3200 is designed for easy integration into existing systems, offering a variety of control options, including trigger inputs and RS-232 connectivity for automation and remote control purposes.

In summary, the Classe Audio CA-3200 is an exemplary power amplifier that combines significant power output, advanced technologies, and meticulous craftsmanship. Its ability to deliver pristine audio performance while offering versatility makes it a compelling choice for both audiophiles and casual listeners alike, ensuring that it meets the demands of modern audio systems with ease.