■Optical Parts Disassemblies
Before taking this procedure, remove Cabinet Top and Main Board following to the “Mechanical Disassemblies”. Disassembly requires a 2.0mm hex wrench and a screwdriver.
Projection Lens removal
1 Remove the Front Panel following to “Front Panel Removal” on “Mechanical Disassemblies”.
2 Remove 4 screws to take the Projection Lens ass’y off.
Fig.1
Integrator Lens-In disassembly
1 Remove 2 screws A and pull the Integrator
A
A
Stopper B
Integrator Lens
|
| * Lens should be placed as the |
|
|
|
| rugged surface side comes to |
| |
| the holder side. |
|
| |
|
|
| ||
|
|
|
|
|