■Mechanical Disassemblies
Mechanical disassemble should be made following procedures in numerical order. Following steps show the basic procedures, therefore unnecessary step may be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of performance and product safety.
1Cabinet Top and Control Panel removal
1 Remove 4 screws A to take the Cabinet Top Ass’y upward off.
2 Remove the Control Panel off from the Cabinet Top by lifting the edge of control panel.
Control panel | A |
A 
Cabinet top
A
A
Fig.1
2Main Board removal
1 Remove 8 screws to take the Main Board upward off.
Main Board
Fig.2