Eiki LC-XGC500 owner manual Auto PC Adjustment, PC Adjust Menu, To store adjustment parameters

Computer Adjustment

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Direct Operation Remote Control

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

AUTO PC button

Menu Operation

	Auto PC Adj..
1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the PC Adjust Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to Auto PC Adj. and then press the SELECT

button twice.

To store adjustment parameters

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–10) in the PC System Menu (see page 37). See also “Store” on page 40.

✔Notes:

•Fine sync,Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.39–40).

•The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.37), or when the signal is coming from the DVI-terminal.

PC Adjust Menu

PC Adjust Menu icon

Move the red frame pointer to Auto PC Adj. and press the SELECT button.

“Please wait...” appears while the Auto PC adjustment is in process.

38