Eiki LC-XGC500 owner manual Slant setting, On start

Page 56

Setting

Select one of the following options:

Ready

When the lamp has been fully cooled

 

down, the POWER indicator changes to fast

 

blinking. In this condition, the projection

 

lamp can be turned on if the input signal

 

is reconnected or any button on the top

 

control or remote control is pressed.

Shut down

When the lamp has been fully cooled down,

 

the power will be turned off.

Off

Power management function is off.

✔Note:

• Factory default is “Ready: 5 min.”

On start

When this function is set to “On,” the projector will be automatically turned on just by connecting the AC power cord to a wall outlet.

✔Note:

•Be sure to turn off the projector properly (see “Turning Off the Projector” on page 25). If the projector is turned off in the incorrect sequence, the On start function does not work properly.

•When the Standby mode is set to “Eco“ in the Setting, the On start funcion is disabled. (p.54)

Power management

Press the SELECT button at Power management and this dialog box appears. Use the Point 7 8 buttons to choose one of the three options.

Press the Point d button to select the timer, and then use the Point 7 8 buttons to set timer.

Slant

This function is used to set the cooling fans’ operation to the projector’s setting environment. Set this function properly in accordance with the projector’s installation method. Otherwise, the cooling fans will not work properly and that causes malfunctions of the projector and decreases the lamp life.

Select the projector’s installation condition from the following options:

Off .....When using the projector within the range of the upward/

downward inclination of ±70º and +110º~ +180º, -110º~ -180º to the horizontal plane.

L1 ......When using the projector within the range of the upward/

downward inclination of +70º~+110º to the horizontal plane.

L2 ......When using the projector within the range of the upward/

downward inclination of -70º~ -110ºto the horizontal plane.

L3 ......When using the projector within the range of the upward/

downward inclination of ±70º to the horizontal plane and the ceiling function is set to “On”.

L4 ......When using the projector within the range of the upward/

downward inclination of +110º~+180º, -110º~ -180º to the horizontal plane and the ceiling function is set to “Off”.

Slant setting

+70°

UP

+0°UP -0°

UP

-70°

UP

L1

L2

UP

+110°

“L4” at Ceiling “Off”

UP

“Off” at Ceiling “On”

 

 

+180°

UP

 

 

-180°

UP

“L3” at Ceiling “On”

 

“Off” at Ceiling “Off”

-110°

 

55

Page 55 Page 57
Image 56
Page 55 Page 57
Contents Model LC-XGC500 LC-XGC500L English FrançaisEspañol DeutschFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Back Part Names and FunctionsFront Side Terminal Audio 2 JackAudio 3 Jacks LMONO/R BNC Input Jacks0USB Connector Series B 1R/C JackTop Control Remote Control 4P-TIMER button 9RESET/ON/ALL-OFF switch5D..ZOOM button 6ZOOM ed buttonsRemote Control Battery Installation Wired Remote ControlRemote Control Code Adjustable FeetMoving the Lens InstallationPositioning the Projector for LC-XGC500 Attaching the lens to the projector Lens InstallationRemoving the lens Connecting to a Computer Digital and Analog RGB Cables used for connection VGAConnecting for Audio Signal Monitor OUT and Audio OUT SpecificationsConnecting the AC Power Cord Projector side AC outlet sideWhat is PIN code? Basic OperationTurning On the Projector Enter a PIN codeTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Zoom Adjustment Focus AdjustmentLens Shift Adjustment Operating with Projector ControlMenu Operation Sound AdjustmentDirect Operation Operating with Remote Control Keystone button Timer buttonShutter button Spotlight Laser Pointer FunctionPointer Function Wireless Mouse Operation Presentation Pointer buttonRemote Control Operation Remote Control button operationInput Selection InputInput Source Selection Input MenuRGB PC analog RGB Scart RGB PC digital Video ComponentVideo System Selection Video or S-videoComponent AV System Menu Video or S-videoComputer Adjustment Computer System SelectionSelecting Computer System Manually PC System MenuAuto PC Adjustment PC Adjust MenuTo store adjustment parameters Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataImage Menu Image Level SelectionImage Level Selection Image Adjust Menu Image AdjustmentImage Adjustment Sharpness GammaNoise reduction ProgressiveTo reset the adjusted data, select Reset and press Screen Adjustment Screen AdjustmentScreen Menu KeystoneScreen Size Adjustment Computer Signals Digital zoom For zooming in and out the imagesDigital zoom + Screen Size Adjustment Video, Component Signals Setting SettingSetting Menu Language LogoCapture Logo PIN code lockChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Lamp life control Lamp modeLamp control Pointer Standby mode Power managementDisplay DisplaySlant Slant settingOn start Key lock Security Key lock and PIN code lock settingsKey lock Change the PIN code lock setting Change the PIN code lock settingPIN code lock Enter a PIN codeTest pattern Change the PIN codeChange the PIN code Factory default Factory defaultMaintenance and Care Filter InstructionsModel No.. of your projector LC-XGC500, LC-XGC500L Replacement Filter Cartridge Service Parts Code 610 342Replacing the Filter Cartridge Filter counter Scroll counterLamp 1/2 Replace Indicators Lamp Mode ChangeoverAuto Lamp Selection System Lamp Status DisplayLamp Replacement Order Replacement Lamp POA-LMP125 Service Parts No 342Then check the matters below Cleaning the Projection Lens Cleaning the Projector CabinetTroubleshooting ProblemNo power AppendixAuto PC adjustment function During the operation Setting does not remain afterTurning off power Power management function doesRemote Control does Wired remote control does notWireless Mouse function does Indicator blinks or lightsMenu Tree InputSystem InformationPC Adjust Screen SettingIndicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition ImmediatelyIf the Filter counter reached a time set in the timer Compatible Computer Specifications ON-SCREEN Resolution59.940 Technical Specifications Optional Parts PJ Link Notice Configurations of Terminals Terminal Analog RGB Mini D-sub 15 pin InputOutput Terminal D-sub 9 pinPIN Code Number Memo Logo PIN Code Lock NoDimensions Deutschland & Österreich
Top Page Image Contents