Eiki LC-XGC500 owner manual Indicators and Projector Condition, Projector is operating normally

Appendix

Indicators and Projector Condition

Check the indicators for the projector condition.

The projector is operating normally..

	Indicators				Projector Condition
POWER	WARNING WARNING		SHUTTER	LAMP 1/2
green / red	TEMP.	FILTER	blue	REP.
	red	orange		yellow
					The projector is off. (The AC power cord is unplugged.)

		✽	✽	✽	✽	The projector is in stand-by mode. Press the ON/STAND-
red						BY button to turn on the projector.
		✽	✽		✽	The projector is operating normally.
green						(The Shutter is open)
		✽	✽		✽	The projector is operating normally.
green						(The Shutter is closed)
						The projector is preparing for stand-by or the projection
						lamp is being cooled down. The projector cannot be
red		✽	✽	✽	✽	turned on until cooling is completed and the POWER
						indicator lights red.
		✽	✽		✽	The projection lamp is being cooled down in the Power
red						management mode.
green		✽	✽		✽	The projector is in the Power management mode.
		✽	✽		✽	The projection lamp is being cooled down in the Shutter
red						management mode.
		✽	✽		✽	The projector is in the Shutter management mode. Press
green						the ON/STAND-BY button to turn on the projector.
✽		✽
				✽	✽	The filter is scrolled using the Filter control function in the
						setting menu. When the filter is being scrolled, the Filter
						replacement icon and“ Please wait...” message (Fig. 1)
						appear on the screen.
Fig..1	Filter replacement icon and “Please wait...”

• • • on	• • • blinking at the normal rate
	(approx. 1 second ON,
	1 second OFF)

• • • blinking slow (approx. 2 seconds ON, 2 seconds OFF)

• • • off	• • •blinking fast	✽	• • • Differs according to conditions.
	(approx. 0.5 seconds ON,
	0.5 seconds OFF)

73