Computer Input
Screen Size Adjustment
This projector has a picture screen resize function, which enables you to display the desirable image size.
1Press the MENU button and the
to the Screen Menu icon.
2Press the Point Down button and move the red frame pointer to the function that you want to select and then press the SELECT button.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When the original image size is larger than the screen size 1024 x 768, this projector enters “Digital zoom +” mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding image width uniformly. This function can be used for providing a squeezed video signal at 16 : 9.
Digital zoom +
When the Digital zoom + is selected, the
A projected image can be also expanded by pressing the D.ZOOM ▲ button on the remote control.
Digital zoom –
When the Digital zoom – is selected, the
A projected image can be also compressed by pressing the D.ZOOM
▼button on the remote control.
To cancel the Digital Zoom +/– mode, press any button except the D.ZOOM ▲/▼, SELECT,
Screen Menu
Screen Menu icon
Move the red frame to the function and press the SELECT button.
NOTE
●This Screen Menu cannot be operated when “720p (HDTV)”, “1035i (HDTV)”, or “1080i (HDTV)” is selected in the PC System Menu (p26).
●The True and Digital zoom +/– cannot be selected when “480i”, “575i”, “480p”, or “575p” is selected in the PC System Menu (p26).
●This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting to the projector.
●The image data in other than XGA (1024 x 768) is modified to fit the screen size in initial mode.
●The panning function may not operate properly if the computer system prepared in the PC Adjust Menu is used.
32