Eiki LC-XB200 owner manual Top Control Input button

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Choose Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control

COMPUTER button Computer 1 ( RGB)

/(Component) / (Scart)

Computer 2 (PC digital) /

(AV HDCP) /

(Analog)

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ed buttons to select Input and
	then press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select Computer 2 and
	then press the Point 8 button.
3	Use the Point ed buttons to select RGB(PC digital)
	or RGB(AV HDCP) and then press the SELECT

button.

✔Note:

•When the Input Search function is set to On1 or On2, the input signal will be searched automatically (p.47).

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

Top Control INPUT button

Computer 1 ( RGB) /(Component) / (Scart)

Computer 2 (PC digital) /

(AV HDCP) /

(Analog)

Video

S-video

Input Menu

RGB(PC digital)

NTSC

Computer

2

30