Eiki LC-XB200 Computer Input Computer System Selection, Selecting Computer System Manually

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 73-74.)

One of the following messages may appear when:

	The projector cannot recognize the connected
Auto
	signal conforming to the provided PC Systems.
	Auto is displayed on the System Menu box
	and the Auto PC Adjustment function works
	to display proper images. If the image is not
	projected properly, a manual adjustment is
	required (pp.33-34).

-----There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on p.67.)

	The preset system is manually adjusted in the
Mode 1
	PC adjust Menu. The adjusted data can be
	stored in Mode 1–5(pp.33-34).
	PC Systems provided in this projector is chosen.
SVGA 1
	The projector chooses a proper system provided
	in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC System Menu

RGB(PC digital)

The PC System Menu Selected system is displayed.

Selecting Computer System Manually

PC system can also be selected manually.

PC System Menu

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ed buttons to select Input and
	then press the Point 8 or the SELECT button.
2	Use the Point ed buttons to select System and then
	press the Point 8 or the SELECT button.
3	Use the Point ed buttons to select the desired system
	and then press the SELECT button.

Customized Mode (1–5)set in the PC adjust Menu (pp.33-34).

RGB(Computer 1)

Systems in this dialog box can be selected.

31