Eiki LC-XB200 owner manual Change the PIN code lock setting, Enter a PIN code Change the PIN code

Setting

Enter a PIN code

Use the Point ed buttons to enter a number. Press the Point 8 button to fix the number and move the red frame pointer to the next box. The number changes to “✳”. If you fixed an incorrect number, use the Point 7 button to move the pointer to the number you want to correct, and then enter the correct number.

Repeat this step to complete entering a four-digit number.

After entering the four-digit number, move the pointer to Set. Press the SELECT button so that you can change the following PIN Code lock setting.

If you entered an incorrect PIN code, PIN code and the number (✳✳✳✳) will turn red for a moment. Enter the correct PIN code all over again.

Change the PIN code lock setting

Use the Point ed buttons to select Off、On1 or On2, and then press the SELECT button to make a choice.

Change the PIN code

The PIN code can be changed to your desired four-digit number. Press the SELECT button to select PIN code change. Pin code dialog box appears, use the Point ed buttons to enter the correct code. The New PIN code input dialog box appears. Set a new PIN code.

caution:

when you have changed THE PIn code, write down the new pin code in column of the pin code no. memo on page 79, and keep it securely. If you forget your PIN code, the projector can no longer be started..

Enter a PIN code

Change the PIN code

57