Eiki LC-XBL30 Computer Input, Input Source Selection RGB Computer 1/Computer, Input Menu

Computer Input

Input Source Selection (RGB: Computer 1/Computer 2)

Direct Operation

Choose either Computer 1(RGB) or Computer 2(RGB) by pressing the COMPUTER 1 or Computer 2 button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control

COMPUTER 1 button

Computer 1(RGB)

Computer 1(Scart)

COMPUTER 2 button

Computer 2 (RGB)

Input Menu

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and
	then press the Point ► or the SELECT button.
2	Use the Point ▲▼ buttons to select Computer 1.
3	When Computer 1 is selected, press the Point ►
	button to access the submenu items. Use the Point ▲

▼ buttons to select the RGB input source and then press the SELECT button.

Computer 1

Note:

When the Input Search function is set to On1 or On2 in the Auto setup function, the input signal will be searched automatically (p.44).

27