Computer Input
Store
To store the adjusted data, select Store and press the Point ►or the SELECT button. Use the Point ▲▼ buttons to select one from Image 1 to 4 and press the SELECT button. A confirmation box appears and then select yes. Stored data can be called up by selecting an Image
|
| A confirmation box appears and |
|
| then select yes. |
Screen Size Adjustment |
| |
This projector has the picture screen resize function, which | Screen Menu | |
enables you to customize the image size. | ||
1 | Press the MENU button to display the |
|
Menu. Use the Point ▲▼ buttons to select Screen and |
| |
| then press the Point ► or the SELECT button. |
|
2 | Use the Point ▲▼ buttons select the desired item and |
|
then press the SELECT button . |
| |
Normal
Provide the image to fit the screen size.
True
Provide the image in its original size. When the original image size is larger or smaller than the screen size
(1024 x 768), the projector enters to the panning mode automatically. Use the Point ▲▼◄► buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.
wide
Provide the image to fit the wide video aspect ratio (16:9) by expanding the image width uniformly. This function can be used for providing a squeezed video signal at 16:9.
Full
Provide the full screen image.
Note:
•The Screen Menu, only Normal and Custom can be operated, wide will be disabled and displayed in gray when 720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.28).
•This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is higher than it, reset the resolution to the lower before connecting to the projector.
•The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.
•True, Full, and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p or 575p is selected in the PC System Menu (p.28).
34