Eiki LC-XBL30 owner manual Part Names and Functions Rear Terminal, ⑥ LAN Connection Terminal

Part Names and Functions

Rear Terminal

① ②

①CONTROL PORT

When controlling the projector with RS-232C, connect the control equipment to this connector with the serial control cable.

②COMPUTER IN 1 /S-VIDEO IN / COMPONENT IN

Connect analog RGB output signal from a computer, S-VIDEO output signal from video equipment, or RGB scart 21-pin video output or component video output to this terminal (pp.14-16).

③COMPUTER IN 2 / MONITOR OUT

–Connect analog RGB output signal from a computer to this terminal (p.14).

–This terminal can be used to output the incoming analog RGB and Component signal from

COMPUTER IN 1 /S-VIDEO IN /COMPONENT IN terminal to the other monitor (pp.14,16).

③④⑤⑥

⑦

④AUDIO OUT (VARIABLE)

Connect an external audio amplifier to this jack (pp.14-16).

This terminal outputs sound from AUDIO IN terminal.

⑤VIDEO IN

Connect the composite video output signal to this jack (p.15).

⑥LAN Connection Terminal

Connect the LAN cable (refer to the owner’s manual of “Network Set-up and Operation”).

⑦AUDIO IN

Connect the audio output signal from computer or video equipment to this jack (pp.14-16).

9