BEFORE OPERATION
NO SHOW BUTTON
D.ZOOM BUTTON
Used to select DIGITAL ZOOM +/– mode and resize image. (P33)
SELECT BUTTON
Used to execute the selected item, or to expand or compress image in DIGITAL ZOOM +/- mode. (P33)
LOCK
AUTO PC
D.ZOOM FREEZE NO SHOW
MUTE IMAGE
VOLUME- SELECT VOLUME+
MENU KEYSTONE
Used to turn picture into black image. (P23)
FREEZE BUTTON
Used to freeze picture. (P23)
POINT (VOLUME
BUTTONS
Operating Range
Point Remote Control Unit toward projector (Infrared Receiver Window) whenever pressing any button. Maximum operating range for Remote Control Unit is about 16.4’ (5m) and 60° in front and rear of a projector.
MENU BUTTON
Used to select MENU operation. (P19, 20)
Used to select an item or adjust value in
POINT LEFT/RIGHT buttons are also used as VOLUME +/- buttons. (P24)
60°
16.4’ (5 m)
Used to operate P- TIMER function. (P23)
ZOOM BUTTON
Used to adjust zoom. (P22)
LASER |
|
INPUT 1 | |
ZOOM | INPUT 2 |
| INPUT 3 |
FOCUS LENS
INPUT 1 BUTTON
Used to select input source (INPUT 1).
(P25)
INPUT 2 BUTTON
Used to select input source (INPUT 2).
(P25, 34)
INPUT 3 BUTTON
Used to select input | 16.4’ |
source (INPUT 3). | (5 m) | |
(P34) | ||
|
60°
REMOTE CONTROL BATTERIES INSTALLATION
1 | Remove battery |
compartment lid. |
Press lid down- ward and slide it.
2 | Slide batteries into | 3 | Replace compartment lid. |
compartment. |
|
Two AA size batteries For correct polarity (+ and
To insure safe operation, please observe following precautions :
●Use (2) AA or R06 type alkaline batteries.
●Replace two batteries at same time.
●Do not use a new battery with an used battery.
●Avoid contact with water or liquid.
●Do not expose Remote Control Unit to moisture, or heat.
●Do not drop Remote Control Unit.
●If a battery has leaked on Remote Control Unit, carefully wipe case clean and install new batteries.
●Danger of explosion if battery is incorrectly replaced.
●Dispose of used batteries according to batteries manufacturers instructions and local rules.
18