Eiki LC-W4 instruction manual Lamp counter reset, Factory default

SETTING

Lamp counter reset

Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP REPLACE indicator stops lighting.

1	Turn projector on, press MENU button and ON-SCREEN
	MENU will appear. Press POINT LEFT/RIGHT button(s) to
	move a red frame pointer to SETTING Menu icon.
2	Press POINT DOWN button to move a red frame pointer to
	“Lamp counter reset” and then press SELECT button.
3	Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and
	then press SELECT button. Message "Lamp replace counter
	Reset?" is displayed. Move pointer to [Yes] and then press
	SELECT button.
	NOTE: Be sure to reset correct lamp number otherwise LAMP
	REPLACE indicator continues lighting.
4	Another confirmation dialog box appears and select [Yes] to
	reset Lamp Replace Counter.

Do not reset Lamp Replace Counter except after Projection lamp is replaced.

Factory default

1 2

Move pointer to Lamp counter reset

and then press SELECT button.

Move arrow to replaced lamp number (Lamp 1 or Lamp 2) and then press SELECT button.

This function returns all setting values except for the lamp counter to the factory default settings.

Press POINT UP/DOWN button to move a red frame pointer to “Factory default” and then press SELECT button. The message "Return to Factory default?" is displayed. Move the pointer to [Yes] and then press SELECT button.

Another confirmation dialog box appears and select [Yes] and then press SELECT button. Return the projector to Factory default.

Quit

Closes SETTING MENU.

1 2

Message "Lamp replace counter Reset?" is displayed. Move pointer to [Yes] and then press SELECT button.

Factory default

42