Eiki LC-W4 instruction manual LCD Projector

LCD PROJECTOR

LENS REPLACEMENT AND INSTALLATION PROCEDURES

CAUTION

When installing or replacing the Projection Lens, refer to this manual. For installation of the lens, use the parts designated in the manual. Do not use the installation manual and Light-Block Sheets in the lens package.

Check the following parts supplied to this projector.

●LIGHT-BLOCK SHEETS 3 pcs.

●LENS ATTACHMENT (01) 1 pce.

●LENS ATTACHMENT (02) 1 pce.

●LIGHT-BLOCK SHEET MOUNTING BASE 1 pce.

●LIGHT-BLOCK SHEET MOUNTING SCREWS 2 pcs.

AVAILABLE LENS

This projector applies the Projection Lenses listed below. Use the suitable lens for where the projector is used.

Model NO.	Type	Zoom	Focus
LNS-W01	Fixed Short Throw Lens	Fixed	Manual
LNS-W01Z
LNS-T01	Fixed Long Throw Lens	Fixed	Manual
LNS-T01Z
LNS-T02	Long Throw Zoom Lens	Motor Driven	Motor Driven
LNS-T03	Long Throw Zoom Lens	Manual	Manual
LNS-W02	Short Throw Zoom Lens I	Motor Driven	Motor Driven
LNS-W02Z
LNS-W03	Short Throw Lens II	Fixed	Manual
LNS-M01	Semi-Long Throw	Motor Driven	Motor Driven
LNS-M01Z	Zoom Lens
LNS-S01	Standard Zoom Lens I	Motor Driven	Motor Driven
LNS-S02	Standard Zoom Lens II	Motor Driven	Motor Driven
LNS-S02Z
LNS-S03	Standard Zoom Lens III	Motor Driven	Motor Driven
LNS-W04	Wide Zoom Lens	Motor Driven	Motor Driven
LNS-W05	Wide Zoom Lens	Motor Driven	Motor Driven
LNS-W06	Wide Zoom Lens	Motor Driven	Motor Driven
LNS-W07	Fixed Short Throw Lens	Fixed	Manual

NOTES ON LENS INSTALLATION

●Lens installation and replacement should be made by the qualified service personnel.

●Be sure to install the lens following this procedure precisely.

●Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard or other accidents.

●Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the projector.

●When moving or setting up the projector, be sure to replace the Lens Cover to protect the surface. And be careful not to hold or subject the lens to strong forces. It may damage the lens, cabinet, or mechanical parts.

●For details of the lens and installation, contact the sales dealer where you purchased the projector.

-1 -

E