Eiki LC-W4 instruction manual Lens Replacement and Installation Procedure

LENS REPLACEMENT AND INSTALLATION PROCEDURE

NOTE: The installation procedure and needed parts for lens installation depend on the type of the Projection Lens. Check the Model No. of the Projection Lens and be sure to install or replace the lens following the procedure below.

1	Remove the Lower Lens Cover. Remove the two
	(2) Screws A. Push the part B and pull the Lower	B

Lens Cover down. (See Fig. 1.)

A	LOWER LENS
	COVER
	C

2	Remove the four (4) Screws C. Pull the Upper
	Lens Cover toward the front and remove.

(See Fig. 2.)

UPPER LENS

COVER

Fig-1

C

Fig-2

E

UPPER LENS

COVER

3	Remove the two (2) Screws D and the Cover
	Plate on the back of the Upper Lens Cover.

(See Fig. 3.)

COVER PLATE D

Fig-3

- 2 -