Konica Minolta manual 14 IP-011 Printer Controller

Chapter 2 Setup

[Image]-[Layout]: 1-Up, 2-Up, 4-Up, 8-Up and 9-Up

Specifies how many pages of documents are gathered on one piece of paper. The default value, [1-Up(Default)], indicates that an one-page document is printed on one piece of paper.

[Image]-[Print Page Borders]: Default value (not printing: without a check mark)

Specifies whether borders are printed or not between documents when they are gathered on one piece of paper.

[Image]-[Staple]: off, 1-Left, 1-Right, 2-Left, 2-Top and 2-Right

Specifies the number of staples to be used and their positions.

When [off] is selected, documents are not stapled.

The staple function is supported when the finisher is attached.

[Image]-[Duplex]: 1-Sided, 2-Sided Long Edge Binding, 2-Sided Short Edge Binding and Booklet

[1- Sided] prints only one side.

[2- Sided Long Edge Binding] prints both sides so that heads of both sides become upward while [2-Sided Short Edge Binding] prints both sides so that the head of one side becomes the bottom of the other side.

[Booklet] prints in consideration of making booklets.

[Output]-[Output Tray]: Printer's default, Tray 1, Tray 2, Tray 3 and Tray 4

Specifies the way to output.

When [Printer's default] is selected, the output tray specified on [Paper] of the control panel will be used for output.

In order to specify [Tray 2], [Tray 3] and [Tray 4], it is required that a finisher is attached to the Copier and that the [Finisher] option must be selected.

[Output]-[Alternate]: On and Off

This setting is available only when the finisher is not attached. The output direction of paper is changed every set of copy.

[Output]-[Sorting]: Sort and Group

Specifies how to output the multiple pages and multiple copy jobs.

[Engine Display]:

Shows the external view of the copier system.

[About] button:

Shows information on the version of the printer driver.

[Default] button:

Returns to the default value.

2-14 IP-011 Printer Controller