Konica Minolta IP-011 manual New Driver, Option Tray

Chapter 3 Printer Driver

[8-Up][9-Up]

When [Booklet] is selected in the Duplex printing, [2-Up] is automatically selected and you can not select other settings.

When [Setup] tab-[Print Page Borders] check box is selected, you can print borders between gathered documents.

Default of Print Page Borders is no check mark.

When Layout is set to [1-Up], you can not select [Print Page Borders].

N

New Driver

To use drivers which are not displayed on the list shown by clicking the [▼] button beside [Details] tab- [Print using the following driver] box, click the [New Driver] button. When a driver is changed, the settings of presently shown property is saved and the property of a newly selected driver is shown.

O

Option

Refer to Finisher and DB.

Option Tray

When the Option Tray is attached to the Konica 7020, it is required to set the [Option Tray] in the [Option] tab. Select either [DB-209] or [DB-409].

Default of the Option Tray is [None].

By setting the Option Tray, functions are limited or enabled as follows;

When [None] is selected in the Option Tray settings or when the Option Tray is not installed, you can not select [Tray 3] and [Tray 4].

When [DB-409] is selected in the Option Tray settings, you can not select [Tray 4] as a paper tray.

When [DB-209] is selected in the Option Tray settings, you can select all trays as a paper tray.

3-14 IP-011 Printer Controller