USB Mouse Support AC97 Audio, Onboard H/W LAN

English

nUSB Mouse Support

Allows user to use a USB-based mouse (Enable if you are using a USB mouse, otherwise Disable) (default:Disabled)

nAC97 Audio

Allows the user to use the onboard AC97 audio (default:Auto)

nOnboard H/W LAN

Allows the user to enable or disable the onboard LAN (default:Enabled)

nOnboard LAN Boot ROM

Allows user to enable or disable booting from a network drive. (default:Disabled)

nOnboard Serial Port 1

Allows the user to enable or disable the first onboard serial port

Options:

Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:3F8/IRQ4)

nOnboard Serial Port 2

Allows the user to enable or disable the first onboard serial port

Options:

Auto, 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Disabled (default:2F8/IRQ3)

nUART Mode Select

This feature allows the user to select the onboard I/O chipset IR function. Options: Normal,IrDA,ASKIR (default:Normal)

nUR2 Duplex Mode

This feature can be configured when Normal in not selected under "UART Mode Select" and allows the user to configure the method of IR transmission (duplex or single mode). Options: Half,Full (default:Half)

nTxD, RxD Polarity Active

This feature can be configured when Normal in not selected under "UART Mode Select" and allows the user to configure RxD, TxD activity.(default: Lo,Hi)

nUse IR Pins

This feature can be configured when Normal in not selected under "UART Mode Select" and allows the user to configure the IR Pins.

Options: IR-Rx2Tx2,RxD2,TxD2 (default:IR-Rx2Tx2)

nOnboard Parallel Port

Allows the user to enable or disable the onboard parallel port.

Options:

378/IRQ7, 278/IRQ5, 3BC/IRQ7, Disabled (default:378/IRQ7)

nParallel Mode

Use this to select the operation mode for the parallel port. Options: PRINTER

SPP (normal)

EPP (Enhanced Parallel Port) ECP (Extended Capabilities Port) EEP1.9+ECP (both ECP and EPP) EEP1.9+SPP (both ECP and EPP) EEP1.7+ECP (both ECP and EPP)

EEP1.9+SPP (both ECP and EPP) (default:SPP)