Intel XP-P41533E user manual Power Management Setup

3.5.Power Management Setup

øThis is used to control the various power saving features of the PC.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Power Management Setup

	ACPI Suspend Type		[S1(POS)]			Item Help
	Power LED in S1 State		[Blinking]			Menu Level}
	Soft-Off by PWR-BTTN		[Instant-Off]			[S1]
	AC Back Function		[Soft-Off]			Set suspend type to
	PME Event Wake Up		[Enabled]			Power On Suspend under
	ModemRingOn		[Enabled]			ACPI OS
	Resume by Alarm		[Disabled]
x	Date (of Month) Alarm		Everyday			[S3]
x	Time (hh:mm:ss) Alarm		0 : 0 : 0			Set suspend type to
						Suspend to RAM under
						ACPI OS
higf: Move		Enter: Select	+/-/PU/PD: Value	F10: Save	ESC: Exit		F1: General Help
	F5: Previous Values		F6: Fail-Save Default		F7: Optimized Defaults

nACPI Suspend Type

Allows user to select the Advanced Configuration and Power Interface(ACPI) as S1/ POS (Power On Suspend) or S3/STR(Suspend To RAM) (default:S1/POS)

nPower LED in S1 state

Allows user to select the system LED status in the S1 (POS - Power On Suspend) state. Options: Blinking (LED will blink)

Dual/OFF (When selecting this, the LED will turn off for a single-colored LED or change color for a dual-colored LED)(default:Blinking)

nSoft-off by PWR-BTTN

Controls whether the PC shuts off immediately after hitting the power button or delaying a few seconds. (default:Instant-off)

Options: Instant-off (PC shuts off immediately)

Delay 4 Sec. (PC shuts off after a 4sec. delay)

nAC Back Function

Allows user to select system status when power is removed and returned.

Options:	Memory (return prior to power removal)
	Full-On (return to full system power)
	Soft-Off (use of Soft PWR button to power on system)(default:Soft-Off)

nPME Event Wake Up

Allows user to select the Power Management Event (PME) wake up function which requires the system to have a +5VSB power supply using a rate of 1A or less. (default:Enabled)

English

20