nFixed PCI/AGP Frequency
This feature can be configured when the "CPU Host Frequency" is set to Enabled and allows the user to adjust the PCI/AGP Frequency without affecting the CPU Frequency.
nHost/DRAM Clock Ratio
Allows the user to set the Host/DRAM Clock Ratio. If the FSB(Front Side Bus) is at 400MHz.
2.66Memory Frequency = Host clock x 2.66.
Auto Automatically sets memory frequency. (default:Auto)
If the FSB(Front Side Bus) is at 533MHz.
2.0Memory Frequency = Host clock x 2.0.
2.5Memory Frequency = Host clock x 2.5.
Auto Automatically sets memory frequency. (default:Auto)
nMemory Frequency (Mhz)
The memory frequency is based on the CPU Host Frequency (Mhz) setting.
nPCI/AGP Frequency(Mhz)
This feature will affect either "CPU Host Frequency" or " Fixed PCI/AGP Frequency".
nCPU OverVoltage Control
Allows increase of CPU voltage. However, over increase of CPU voltage can cause damage to CPU.
Options: | Normal, +5%, +7.5% , +10% (default:Normal) |
nAGP OverVoltage Control
Allows increase of AGP voltage. However, over increase of AGP voltage can cause
damage to AGP.
Options: | Normal, +0.1V , +0.2V, +0.3V (default:Normal) |
nDIMM OverVoltage Control
Allows increase ofDIMM voltage. However, over increase of DIMM voltage can cause damage to DIMM.
Options: | Normal, +0.1V , +0.2V, +0.3V (default:Normal) |
English
24