Intel BPC-500-5820 user manual PNP/PCI Configuration, Level

PNP/PCI Configuration

ROM PCI/ISA BIOS (2A5IMTPD)

PNP/PCI CONFIGURATION

AWARD SOFTWARE, INC.

Resources Controlled By		:	Manual	PCI IRQ Activated By		: Level
Reset Configuration Data		: Disabled
IRQ-3	assigned to	: PCI/ISA Pnp
IRQ-4	assigned to	: PCI/ISA Pnp
IRQ-5	assigned to	: PCI/ISA Pnp
IRQ-7	assigned to	: PCI/ISA Pnp
IRQ-9	assigned to	: PCI/ISA Pnp
IRQ-10 assigned to		: PCI/ISA Pnp
IRQ-11 assigned to		: PCI/ISA Pnp
IRQ-12 assigned to		: PCI/ISA Pnp
IRQ-14 assigned to		: PCI/ISA Pnp
IRQ-15 assigned to		: PCI/ISA Pnp
DMA-0	assigned to	: PCI/ISA Pnp
DMA-1	assigned to	: PCI/ISA Pnp
				Esc: Quit	− ↓ → ← : Select Item
DMA-3	assigned to	: PCI/ISA Pnp
				F1 : Help	PU/PD/+/-	: Modify
DMA-5	assigned to	: PCI/ISA Pnp
DMA-6	assigned to	: PCI/ISA Pnp		F5 : Old Values (Shift)F2: Color
DMA-7	assigned to	: PCI/ISA Pnp		F6 : Load BIOS Defaults
				F7 : Load Setup Defaults

This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components.

Resources Controlled By

The Award Plug and Play BIOS can automatically configure all the boot and Plug and Play-compatible devices. If you select Auto, all the interrupt request (IRQ) and DMA assignment fields disappear, as the BIOS automatically assigns them. Choice: Auto and Manual.

Reset Configuration Data

Normally, you leave this field Disabled. Select Enabled to reset Extended System Configuration Data (ESCD) when you exit Setup if you have installed a new add-on and the system reconfiguration has caused such a serious conflict that the operating system cannot boot. Choice: Enabled and Disabled.

IRQ n Assigned to

When resources are controlled manually, assign each system interrupt as one of the following types, depending on the type of device using the interrupt:

Legacy ISA	Devices compliant with the original PC AT bus specification, requiring a
	specific interrupt (such as IRQ4 for serial port 1).
PCI/ISA PnP	Devices compliant with the Plug and Play standard, whether designed for
	PCI or ISA bus architecture.

DMA n Assigned to

When resources are controlled manually, assign each system DMA channel as one of the following types, depending on the type of device using the interrupt:

Legacy ISA	Devices compliant with the original PC AT bus specification, requiring a
	specific DMA channel
PCI/ISA PnP	Devices compliant with the Plug and Play standard, whether designed for
	PCI or ISA bus architecture.

PCI IRQ Activated By

This sets the method by which the PCI bus recognizes that an IRQ service is being requested by a device. Under all circumstances, you should retain the default configura- tion unless advised otherwise by your system's manufacturer.

The choice: Level, Edge.

BPC-500-5820 User's Manual 22