Intel BPC-500-5820 user manual

Page 28

11

Test DMA Page

Test DMA Page Registers.

 

Registers

 

12-13

Reserved

 

14

Test Timer

Test 8254 Timer 0

 

Counter 2

Counter 2

15

Test 8259-1 Mask

Verify 8259 Channel 1 masked

 

Bits

interrupts by alternately turning off

 

 

and on the interrupt lines.

16

Test 8259-2 Mask

Verify 8259 Channel 2 masked

 

Bits

interrupts by alternately turning off

 

 

and on the interrupt lines.

17

Test Stuck

Turn off interrupts then verify no

 

8259's Interrupt

interrupt mask register is on.

 

Bits

 

18

Test 8259

Force an interrupt and verify the

 

Interrupt

interrupt occurred.

 

Functionality

 

19

Test Stuck NMI

Verify NMI can be cleared.

 

Bits (Parity/IO Check)

 

1A

 

Display CPU clock

1B-1E

Reserved

 

1F

Set EISA Mode

If EISA non-volatile memory checksum

 

 

is good, execute EISA initialization.

 

 

If not, execute ISA tests an clear

 

 

EISA mode flag.

 

 

Test EISA Configuration Memory

 

 

Integrity (checksum & communication interface).

20

Enable Slot 0

Initialize slot 0 (System Board).

21-2F

Enable Slots

Initialize slots 1 through 15.

 

1-15

 

30

Size Base and

Size base memory from 256K to 640K

 

Extended Memory

and extended memory above 1MB.

31

Test Base and

Test base memory from 256K to 640K

 

Extended Memory

and extended memory above 1MB using various

 

 

patterns.

 

 

NOTE: This test is skipped in EISA

 

 

mode and can be skipped with ESC key

 

 

in ISA mode.

32

Test EISA

If EISA Mode flag is set then test

 

Extended Memory

EISA memory found in slots initialization. NOTE:

 

 

This test is skipped in ISA mode and can be

 

 

skipped with ESC key in EISA mode.

33-3B

Reserved

 

3C

 

Setup Enabled

3D

Initialize &

Detect if mouse is present,

 

Install Mouse

initialize mouse, install interrupt vectors.

3E

Setup Cache

Initialize cache controller.

 

Controller

 

3F

Reserved

 

BF

Chipset

Program chipset registers with Setup

 

Initialization

values

40

 

Display virus protect disable or enable

41

Initialize

Initialize floppy disk drive

 

Floppy Drive &

controller and any drives.

 

Controller

 

42

Initialize Hard

initialize hard drive controller and

 

Drive & Controller

any drives.

43

Detect & Initialize

Initialize any serial and parallel

 

Serial/Parallel Ports

ports (also game port).

44

Reserved

 

BPC-500-5820 User's Manual

28

Image 28
Contents BPC-500-5820 FCC Class a Copyright All Rights ReservedTable of Contents Introduction Getting StartedDimension Power Adapter Rear PanelExternal I/O Mechanical & EnvironmentBasic installation Hardware InstallationRemoving Top Cover Installing CPU Installing Memory Module Installing Hard Disk Drive Installing Wall-Mount Bracket Box PC Kernel Information System ResourcesPorts Input/Output IO AddressAward Bios Setup Standard Cmos Setup44M , 3.5 NoneFloppy Mode 3 Support AutoNormal LargeBios Features Setup EnabledSetup 250Typematic Delay Msec Video Bios ShadowSecurity Option PCI/VGA Palette SnoopQWs Chipset Features Setup64MB Dram Opt RAS Precharge Sdram WR Retire RatePCI Peer Concurrency Power Management Setup Always OnPoer Off 15 MinDoze Mode Standby ModeSuspend Mode HDD Off AfterPNP/PCI Configuration LevelIntegrated Peripherals PIM-582 version Hardware MonitorIntegrated Peripherals PIM-582C version IDE Burst Mode IDE HDD Block ModeIR Mode Parallel Port ModeVisible Error Messages Audible Error MessagesPost Codes Keyboard error or no keyboard present Override enabled Defaults loadedHard Disk initializing Please wait a moment Hard disks diagnosis failPost Code Error Messages Code Check Description of CheckPage Page Procedure Howto Flash the Bios WarrantyWhat do you need