Intel V09 manual Amt, Sdram CAS#, Sdram RAS#

BIOS Settings Dictionary – Alphabetical
Save and Commit	Intel® ME		Save and commit changes made to Intel® ME or Intel®
Settings			AMT.
Save Custom Defaults	Exit	No changeable	Saves the current values as custom defaults. Normally, the
		options	BIOS reads the Setup values from flash memory. If this
			memory is corrupted, the BIOS reads the custom defaults.
			If no custom defaults are set, the BIOS reads the factory
			defaults.
Scan User Flash Area	Boot	• Disabled	Enables the BIOS to scan the flash ROM for user binary
		• Enabled	files that are executed at boot time.
SDRAM CAS#	Advanced >	• 2.0	Selects the number of clock cycles required to address a
Latency	Chipset	• 2.5	column in memory. Corresponds to CL.
	Configuration	• 3.0
	or
	Advanced >
	Memory
	Configuration
SDRAM Frequency	Advanced >	• Auto	Allows override of detected memory frequency value.
	Chipset	• 266 MHz
	Configuration	• 333 MHz
		• 400 MHz
	or
	Advanced >
	Memory
	Configuration
SDRAM RAS Act. To	Advanced >	• 8	Selects length of time from read to pre-change.
Pre.	Chipset	• 7	Corresponds to tRAS, min.
	Configuration	• 6
		• 5
	or
	Advanced >
	Memory
	Configuration
SDRAM RAS#	Advanced >	• 4	Selects the length of time required before accessing a new
Precharge	Chipset	• 3	row.
	Configuration	• 2
	or
	Advanced >
	Memory
	Configuration
SDRAM RAS# to	Advanced >	• 4	Selects the number of clock cycles between addressing a
CAS# delay	Chipset	• 3	row and addressing a column. Corresponds to tRCD.
	Configuration	• 2
	or
	Advanced >
	Memory
	Configuration
SDRAM Timing	Advanced >	• Auto	Auto allows timings to be programmed according to the
Control	Chipset	• Manual –	memory detected.
	Configuration	Aggressive
		• Manual – User	Manual – Aggressive selects the most aggressive user
	or	Defined	defined timings.
	Advanced >		Manual – User Defined allows manual override of
	Memory		detected SDRAM settings.
	Configuration

V09 – March 2008