Intel V09 manual Sol/Ider

BIOS Settings Dictionary – Alphabetical
Set Supervisor	Security	Password can be	Specifies the Supervisor password.
Password		up to seven
		alphanumeric	The supervisor password gives unrestricted access to view
		characters.	and change all Setup options. If only the supervisor
			password is set, pressing <Enter> at the password prompt
			of Setup gives the user restricted access to Setup. If both
			the supervisor and user passwords are set, you must enter
			either the supervisor password or the user password to
			access Setup. Setup options are then available for viewing
			and changing depending on whether the supervisor or user
			password was entered.
Set User Password	Security	Password can be	Specifies the user password.
		up to seven
		alphanumeric
		characters.
Set User Password	Security	Password can be	Specifies the User password.
		up to seven
		alphanumeric	Setting a user password restricts who can boot the
		characters.	computer. The password prompt is displayed before the
			computer is booted. If only the supervisor
			password is set, the computer boots without asking for a
			password. If both passwords are set, you can enter either
			password to boot the computer.
Silent Boot	Boot	• Enabled	Disabled displays normal POST messages.
		• Disabled
			Enabled displays OEM logo instead of POST messages.
SOL/IDER	Intel® ME > Intel®	• Kerberos only	Selects how IDER and SOL operation verify and secure
Authentication Mode	Active	• User Name and	interfaces on LAN
	Management	Password
	Technology
	Configuration >
	SOL/IDER
	Configuration
Subnet Mask	Intel® ME > Intel®	User defined	Enter the address in dot-decimal notation.
	Active
	Management
	Technology
	Configuration >
	TCP/IP
	Configuration
Subnet Mask	Manageability	<Enter>	Press <Enter> to edit the subnet mask for the client
			system.
This setting editable
only if Obtain an IP
Automatically is set to
No.
Supervisor Password	Security	No changeable	Reports if there is a Supervisor password set.
		options
SW Single Processor	Main	• Enabled	Sets the processor mode for dual core processors.
Mode		• Disabled
			Disabled: Dual Core processor will run in Dual Core mode.
This BIOS setting is
present only on Intel®			Enabled: Dual Core processor will NOT run in Dual Core
Desktop Boards that			mode.
include support for
dual core processors
when a dual core
processor is installed.

V09 – March 2008