Intel V09 manual C1E

BIOS Settings Dictionary – Alphabetical
Boot USB Devices		• Enabled
		• Disabled
First	Boot		Sets USB devices to be first in boot order.
Bound to Server	Manageability	• Yes	This BIOS option is changeable ONLY when the system is
		• No	bound to a server. Select No to release the client/server
If the client is bound to			binding.
a server, this option
will display the			When the binding is no longer applicable, for example if the
server's IP address in			system has crashed or the server has been changed, you
this format: Bound to			need to release the client/server binding, otherwise the
Server:			client will be unable to be managed by another server.
xxx.xxx.xxx.xxx
Burn-In Mode	Advanced >	• Default	Alters host and I/O clock frequencies.
	Chipset	• -2.0%
	Configuration	• -1.0%	Warning : This setting is intended for validation and test
		• +1.0%	purposes only. Altering clock frequencies may reduce
		• +2.0%	system stability and/or the useful life of the system and
		• +3.0%	processor. Operation at settings beyond component
		• +4.0%	specification is not covered by Intel component warranties.
			If any problems occur during operation at non-default
			settings, reset the board to default values.

C

BIOS Setting	Appears on BIOS	Options	Description / Purpose
	Screen…
C1E	Maintenance	• Enabled	Allows the system to change voltage level (lower) of
		• Disabled	processor when no work is being done.
Cable Detected	Advanced > Drive	No changeable	Displays the type of cable connected to the IDE interface:
	Configuration >	options	40-conductor or 80-conductor (for ATA-66/100 devices) or
This BIOS setting is	SATA/PATA		Serial ATA.
present only if an IDE
device is installed.
CD/DVD Drive Order	Boot	Lists all installed	Allows you to set the boot order of CD/DVD drives (used
		CD/DVD devices	when Boot Menu type is set to normal)
CD-ROM Boot Priority	Boot	Lists all installed	Allows you to set the boot order of CDROM drives
		CD-ROM devices
Change Intel®	Intel® ME	User defined	Intel® ME password must be changed from the default
Management Engine			password prior to gaining access to other ME options.
Password			Intel® ME passwords must be between 8 and 32
			characters long, have at least one upper case character,
			one lower case character, one number, and a special
			character (for example: !, @, #, $, %, ^, &, *).
			The system owner should document the new Intel ME
			password, store it in a secured location (a vault, safe
			deposit box, or off-site storage), and have it available for
			future use. This document should be updated after any
			password change is made.
Chassis Fan Speed	Advanced >	No changeable	Displays chassis fan speed
	Hardware	options
	Monitoring
Chassis Inlet Fan	Advanced >	No changeable	Displays front chassis fan speed
	Hardware	options
	Monitoring
Chassis Intrusion	Security	• Enabled	Enables or disables the chassis intrusion feature.
		• Disabled

V09 – March 2008