Intel V09 manual Ide, RAID Ahci

BIOS Settings Dictionary – Alphabetical
Chassis Outlet Fan	Advanced >	No changeable	Displays rear chassis fan speed
	Hardware	options
	Monitoring
Clear All DMI Event	Advanced > Event	• Yes	Yes - the DMI Event Log will be cleared at next POST
Log	Log Configuration	• No	stage and then this option automatically resets to No.
Clear All Passwords	Maintenance	Selecting this	Clears both the user and supervisor passwords.
		option clears the
		passwords.
Clear Event Log	Advanced > Event	• Enabled	Enable discards all events in the event log and will reset
	Log Configuration	• Disabled	the option to disable upon exiting BIOS.
Clear Trusted	Maintenance	• OK	Used to clear the TPM if you are transferring ownership of
Platform Module		• Cancel	the platform to a new owner. For more information, refer to
			your Trusted Platform Module Quick Reference Guide.
This BIOS setting is
present only on Intel®
Desktop Boards that
include support for
Trusted Platform
Module (TPM).
Clear User Password	Security	Selecting this	Clears the user password.
		option clears the
This BIOS setting is		password.
present only if a user
password has been
set.
Compatibility Mode	Intel® ME > Intel®	• Intel® AMT	Depending on the 3rd party management software that is
	Active	Generation 2.0	chosen to be used with this system (if any), set the
	Management	• Intel® AMT	Compatibility Mode appropriate to the management
	Technology	Generation 1.0	software.
	Configuration >
	Provisioning
	Configuration
Compliance Test	Advanced > PCI	• Enabled	Used for making sure a PCI Express slot remains
Pattern	Express	• Disabled	functional and enabled per PCI Express specification for
	Configuration		Compliance test card testing of PCI Express cards.
Computer Name	Intel® ME > Intel®	User defined	Sets the computer name. The computer name must be
	Active		between 1 and 32 characters long, may contain upper case
	Management		characters, lower case characters numbers, however
	Technology		spaces, dashes, and any other special characters (for
	Configuration		example: !, @, #, $, %, ^, &, *) are not allowed.
Configure SATA as…	Advanced > Drive	• IDE	IDE is default
	Configuration	• RAID
		• AHCI	RAID: enables RAID which may require you to install the
			RAID Driver during OS installation
			AHCI: allows you to take advantage of Advanced Host
			Controller Interface features such as Native command
			Queuing , Hot plug, etc., without the option to use RAID.
			Requires a hard drive that supports AHCI.
Core Multiplexing	Main	• Enabled	When disabled, turns off all but one processor core. You
Technology		• Disabled	may need to disable this for legacy operating systems that
			do not support multiple cores. The remaining core may
This BIOS setting is			have access to more cache. The amount of cache available
present only when a			to the remaining core will depend on the particular
dual core processor is			processor. The increase in available cache can result in
installed.			better performance under certain applications.

V09 – March 2008