BIOS Settings Dictionary – Alphabetical
A
BIOS Setting | Appears on BIOS | Options | Description / Purpose |
| Screen… |
|
|
|
|
|
|
Access Level | Maintenance | No changeable | Displays the current user's access level. |
|
| options |
|
|
|
|
|
Access Mode | Advanced > Drive | • CHS | Allows you to select the sector addressing mode. |
| Configuration | • LBA |
|
|
| • Large | CHS (cylinder, head, sector) mode supports up to 528 MB |
|
| • Auto | hard disks. |
|
|
| LBA (logical block addressing) mode supports hard disks |
|
|
| up to 128 GB in size. |
|
|
| Large mode supports hard disks above 528 MB in size, but |
|
|
| does not support LBA mode. |
|
|
|
|
ACPI | Power | No changeable | Opens the |
|
| options | and Power Interface). |
|
|
|
|
ACPI Suspend Mode | Power > ACPI | • S1 State | Specifies the ACPI sleep state. |
(or ACPI Suspend |
| • S3 State |
|
State) |
|
|
|
|
|
|
|
Additional System | Main | No changeable | Displays information such as System Information, Desktop |
Information |
| options | Board Information, Chassis Information, etc. |
|
|
|
|
AddOn ROM Display | Boot | • Enabled | Enabled : the logo screen will be followed by the “AddOn |
Mode |
| • Disabled | ROM” initial screen (the screen showing the |
|
|
| BIOS message). |
|
|
| Disabled: no |
|
|
|
|
After Power Failure | Power | • Stay Off | Determines the mode of operation if a power loss occurs. |
|
| • Last State |
|
|
| • Power On | Stay Off keeps the power off until the power button is |
|
|
| pressed. |
|
|
| Last State restores the previous power state before power |
|
|
| loss occurs. |
|
|
| Power On restores power to the computer. |
|
|
|
|
Agent | Manageability | • Enable | By default, Intel® Platform Administrator Agent is disabled. |
|
| • Disable | To enable the agent, select Enable . |
|
|
|
|
AGP/PCI | Advanced > | • Default | Enables the selection of specific AGP/PCI clock |
Mode | Chipset | • 63.88/31.94 MHz | frequencies. The host clock (system bus speed) is not |
| Configuration > | • 68.05/34.02 MHz | changed. |
| • 69.44/34.72 MHz |
| |
|
| • 70.83/35.41 MHz | If this option is set to anything other than Default, the Host |
|
| • 72.22/36.11 MHz | and I/O |
|
| • 73.60/36.80 MHz |
|
|
|
|
|
Alternate DNS | Intel® ME > Intel® | User defined | Enter the address in |
Address | Active |
|
|
| Management |
|
|
| Technology |
|
|
| Configuration > |
|
|
| TCP/IP |
|
|
| Configuration |
|
|
V09 – March 2008