Intel GA-G1975X Limit Cpuid Max. to, No-Execute Memory Protect Note, CPU Enhanced Halt C1E Note

Limit CPUID Max. to 3

Enabled	Limit CPUID Maximum value to 3 when use older OS like NT4.
Disabled	Disables CPUID Limit for windows XP.(Default value)

No-Execute Memory Protect (Note)

Enabled	Enable No-Execute Memory Protect function.(Default value)
Disabled	Disable No-Execute Memory Protect function.

CPU Enhanced Halt (C1E) (Note)

Enabled	Enable CPU Enhanced Halt (C1E) function.(Default value)
Disabled	Disable CPU Enhanced Halt (C1E) function.

CPU Thermal Monitor 2 (TM2) (Note)

Enabled	Enable CPU Thermal Monitor 2 (TM2) function.(Default value)
Disabled	Disable CPU Thermal Monitor 2 (TM2) function.

CPU EIST Function (Note)

Enabled	Enable CPU EIST function.(Default value)
Disabled	Disable CPU EIST function.

Virtualization Technology

Enabled	A VMM can utilize the additional hardware capabilities provided by
	Virtualization Technology. (Default value)
Disabled	Disabled this function.

Delay For HDD (Secs)

Set delay HDD time from 0~15(secs).

Init Display First

This feature allows you to select the first initiation of the monitor display from which card when you install a PCI card and a PCI Express VGA card on the motherboard.

PCI	Set Init Display First to PCI VGA card.
PEG	Set Init Display First to PCI Express VGA card (PCIE_16_1 slot). (Default value)
PEG2	Set Init Display First to PCI Express VGA card (PCIE_16_2 slot).

DRAM Data Integrity Mode

ECC	Enable Memory Error Checking and Correction feature when all installed DIMMs
	are 72bits width.
Non-ECC	Set DRAM Data Integrity Mode to Non-ECC. (Default value)

English

- 43 - BIOS Setup