ViewSonic WPCI-100 manual Verifying a Successful Installation, Uninstalling the Drivers

Verifying a Successful Installation

The simplest way to verify a successful installation is to try opening your Internet browser. If it opens, installation is complete.

For a more through way to verify a successful installation, do the following:

1.Click Start, click Control Panel, select Classic View, click System, select the Hardware tab, then click Device Manager tab.

2.In the System Properties dialogue box, click the Hardware tab, then click Device Manager.

3.In the opened screen, expand Network Adapters double-click Wireless 802.11g Network Adapter.

NOTE: If the WPCI-100 is installed properly, there will NOT be a red or yellow icon next to Wireless 802.11g Network Adapter, such as a question mark (?).

4.If you do see a yellow or red icon, do the following to uninstall the drivers: Start (Windows desktop) Programs > Wireless Network > Uninstall.

5.After uninstalling the drivers, repeat the installation procedure described in the preceding pages.

Uninstalling the Drivers

To uninstall the driver and wireless utility software, do the following:

1.Click Start on the Windows desktop.

2.Select: Programs > Wireless Network > Uninstall.

ViewSonic Wireless PCI Adapter 10