Brother HL-1040, HL-820 Installation Procedures, Install the printer onto the lower tray unit

INSTALLATION

3.3Installation Procedures

3.3.1Install the printer onto the lower tray unit

1)Place the lower tray unit on a solid, flat surface where the printer is to be installed ensuring that the conditions in sections 3.1.1 and 3.1.2 are complied with.

2)Check that the set-up guides R/L are fixed onto the lower tray unit.

Set-up Guide (L)

Set-up Guide (R)

Fig. 4

3)Pull out the LT signal connector which is located at the rear left side of the unit, and remove the LT connector cover from the lower tray unit.

LT Signal Connector

LT connector cover

Fig. 5

- 5 -