Brother HL-1020, HL-820, HL-1040 manual For HL-1050

CHAPTER 6 TROUBLESHOOTING

Question

Sometimes I get the memory Full message. How can I correct this?

Sometimes I get a Print Overrun error when printing certain documents from Windows.

Recommendation

Reduce the print resolution or reduce the complexity of your document and try again.

(For HL-1050)

Expand the printer memory by adding a

￿commercially available SIMM.

(For HL-1050)

Change the following settings in the supplied Windows driver and try again. The best combination of the following settings may vary depending on your document.

Graphics Mode TrueType Mode

Use Printer TrueType Fonts

If you are using the supplied Windows driver, turn error recovery on in the Setup dialog box and try again.

Reduce the print resolution or reduce the

￿complexity of your document and try again.

(For HL-1050)

Expand the printer memory by installing a commercially available SIMM and set the Page

￿Protection ON in the supplied Windows driver.

(For HL-1050)

Change the following settings in the supplied Windows driver and try again. The best combination of the following settings may vary depending on your document.

Graphics Mode TrueType Mode

Use Printer TrueType Fonts

6-9