Brother HL-820, HL-1020, HL-1040 manual Using the Remote Printer Console Main Program

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX and press the Enter key to start the Remote Printer Console main program.

The Main Screen will appear on your computer screen as shown on the right.

Remote Printer Console

Direct_Access Printer_Setup Console_Config Guide

Current Status

Status Ready

Media Type Regular

Emulation Auto

Paper Size Letter

Orientation Portrait

Quality Normal

Copies 1

Memory Size 1048576 Bytes

[￿/￿] Select [Enter]Setting

[Alt+Character] Menu [F1] Help [Esc] Exit

The RPC gets the current settings information from your printer when it starts if bi-directional communication is enabled between your computer and printer. Otherwise, RPC shows its default settings. If you want to change settings, move the cursor to the desired item and select the desired setting by using the Enter and cursor keys. Then, press the Enter key to make the selected setting valid. If you use a mouse, click the desired item to change the setting.

Additionally, there are four sub-menus as shown in the table below. Select a sub-menu by clicking the desired sub-menu with the mouse, by using the cursor key and the Enter key, or by using the keys shown below to switch the screen to the sub menus.

Menu	Press the keys	Functions
Direct Access	Alt + D	You can directly control printer functions such as Print
		Form, Self Print, Reset Printer, Sleep Control.
Printer Setup	Alt + P	You can enter the setting mode to change further printer
		settings, such as, margin settings, continue mode,
		reprint function, font, and sleep mode.
Console Config	Alt + C	You can change the environment settings for the RPC
		program: color, Status Monitor configuration, etc.
Guide	Alt + G	You can get into the Guide mode.
Help	F1	You can get On-Line help about the current highlighted
		item by pressing F1.

- 18 -