Brother HL-1040, HL-820, HL-1020 manual Options

CHAPTER 4 OPTIONS

You can connect a parallel and a serial interface cable at the same time. The auto interface selection function allows you to share the printer with two computers. To do this, connect the parallel interface cable and then connect the serial interface cable as follows:

1. Make sure that the power switch is turned off.

!Caution

Be sure to turn off the power switch before connecting or disconnecting the interface cables, or the printer may be damaged.

2.Insert and secure the parallel interface connector into the parallel interface port of your printer.

3.Insert and secure the serial interface connector into the serial interface port of your printer.

4.Turn on the power switch.

4-5