CHAPTER III DISASSEMBLY AND REASSEMBLY
1.SAFETY PRECAUTIONS
To avoid creating secondary problems by mishandling, be careful to follow the following precautions during maintenance work.
(1)Always turn off the power switch and unplug the power cord from the power outlet before accessing any parts inside the printer.
(2)Be careful not to lose screws, washers, or other parts removed.
(3)Be sure to apply grease to the gears and applicable positions specified in this chapter.
(4)When using soldering irons or other
(5)Before handling any PCBs, touch a metal portion of the equipment to discharge any static electricity charge on your body, or the electronic parts or components may be damaged.
(6)When transporting PCBs, be sure to wrap them in the correct protective packaging.
(7)Be sure to replace
TAPTITE, BIND or CUP B
M3 : 7kgf • cm
M4 : 10kgf • cm
TAPTITE, CUP S
M3 : 8kgf • cm
SCREW
M3 : 7kgf • cm
M4 : 8kgf • cm
(8)When connecting or disconnecting cable connectors, hold the connector body, not the cables. If the connector has a lock, release the connector lock first to release it.
(9)After a repair, check not only the repaired portion but also all connectors. Also check that other related portions are functioning properly before operational checks.
