Brother HL-1040, HL-820, HL-1020 manual Removing the Drum Unit

USER’S GUIDE

Follow these steps to replace the drum unit:

1. Open the top cover towards you. Remove the old drum unit.

Fig. 5-12 Removing the Drum Unit

Warning

After you have just used the printer, some internal parts of the printer are extremely hot. When you open the top cover of the printer, never touch the shaded parts shown in the following illustration.

High Temperature

Fig. 5-13 Inside the Printer

2.Remove the toner cartridge from the drum unit and keep it in a safe place. For more information, see “REPLACING THE TONER CARTRIDGE” in this chapter.

✒￿Note

Discard the used drum unit according to local regulations. If you are not sure of them, consult your local dealer/retailer. Be sure to seal up the drum unit tightly so that toner powder does not spill out of the

￿unit. Do not discard used drum units together with domestic rubbish. It is recommended to put the drum unit on a piece of disposable paper or cloth in case of accidental toner spill or scatter.

5-8