Brother HL-1040, HL-820, HL-1020 manual Main Motor Assy, Sub Motor Assy

Note:

When re-assembling the drive unit, ensure that you fit the drive unit underneath the

￿electrode DRB1.

When disassembling the drive unit, be sure to remove the eight ferrite cores of two types on the heater harness and the motor harness. (Refer to the figures in the previous page, Fig. 3-26 and Fig. 3-27.) The place where the bigger core should be assembled varies depending on the model.

3.16Main Motor ASSY

(1)Remove the two M3x6 screws securing the main motor.

(2)Remove the main motor ASSY.

Taptite, bind M3x6

Drive Unit Main Motor ASSY

Fig. 3-28

3.17Sub Motor ASSY

(1)Remove the two M3x6 screws securing the sub motor.

(2)Remove the sub motor ASSY.

T p i in M x

Sub Motor ASSY

Fig. 3-29

III-16