Brother HL-820, HL-1020, HL-1040 manual Chapter Control Panel

CHAPTER 3 CONTROL PANEL

CHAPTER 3

CONTROL PANEL

LAMPS AND SWITCH

This section refers to the following lamps and switch on the printer control panel.

Drum

Alarm

Ready

Paper

Data

Toner

Fig. 3-1 Lamps and Switch on Control Panel

✒Note

When the power switch is off or the printer is in sleep mode, all lamps including the Ready lamp are off.

Ready (Paper) Lamp

The Ready lamp indicates the current status of the printer.

Lamp	Printer status
Off	The power switch is off or the printer is in sleep
	mode. If the printer is in sleep mode, it will wake
❍
	up automatically when it receives data or you
	press the control panel switch.
Blinking	The printer is warming up.
❍↔●	(Blinking at 1 second intervals)
Blinking	The printer is cooling down and stops printing
❍↔●	until the printers internal temperature lowers.
	(Blinking at 2 seconds intervals)
On	The printer is ready to print.
●

This lamp also works as the Paper lamp with the Alarm lamp. They blink simultaneously to indicate a paper error. See “Operator Calls” Chapter 6.

3-1