Brother HL-1040, HL-820, HL-1020 manual Connect the LT signal connector into the printer

INSTALLATION

3.3.2Connect the LT signal connector into the printer

1)Remove the LT connector cover (U) from the printer.

2)Connect the LT signal connector into the connector of the printer.

NOTE:

Connect the LT signal connector into the printer connector correctly until it clicks as it locks into position.

3)Install the LT connector cover onto the printer.

4)Install the LT connector cover (U) onto the lower tray unit.

LT connector cover (U)

LT Signal Connector

LT connector cover

Fig. 10

- 8 -