Brother HL-1020, HL-820, HL-1040 manual Action 3 Install the Toner Cartridge/Drum Unit

Action 3: Install the Toner Cartridge/Drum Unit

1

Starter Sheet

Unpack the drum unit assembly with the toner cartridge included. Gently shake it from side to side five or six times.

!CAUTION

Do not expose the drum unit to light for longer than a few minutes, as this will damage the drum.

!CAUTION

Do not remove the starter sheet.

This sheet will be ejected while the printer is warming-up after installing a new drum unit. (See Action 5 Illustration 4)

2

3

4

Open the top cover of the printer by holding both sides of it.

Holding the drum by its handles, install it into the printer.

Close the top cover.

See “CHAPTER 5 MAINTENANCE” in the On-line User’s Guide for more information about replacement of the toner cartridge.

- 4 -