Brother HL-1040, HL-820, HL-1020 manual Paper Loading, Print Delivery

2.4Paper Loading

(1)Multi-purpose sheet feeder loading

Paper size: A4, Letter, Legal, B5, A5, A6, and Executive. Other sizes of media that can be handled by the feed mechanism can be loaded.

69.8 to 229 mm

105 to 356mm (face down)

Feeding direction

	Feedable paper weight:	60 (16lb.) to 158 (42lb.) g/m2
	Maximum load height :	22mm (200 sheets of 80g/m2 paper) letter or A4 size
	Setting method:	Pull the MP sheet feeder cover toward you, insert the
		stack of paper into the feeder, aligning the top edge of
		the sheets, then push the cover back to its original
		position.
(2)	Manual slot loading
	Paper size:	Same as in (1) for the multi-purpose sheet feeder.
	Feedable paper weight:	Same as in (1) for the multi-purpose sheet feeder.
	Setting methods:	Place the side of the paper to be printed on face down
		into the manual feed slot after selecting orientation. Align
		the paper at the center of the manual feed slot, and be
		sure to insert it fully into the feed slot. Move the paper
		guide of the manual feed slot to the paper width.

Cautions:

Before loading paper with holes such as organizer sheets, be sure to fan the stack

￿well.

When printing on the back of pre-printed paper, be sure to straighten the paper as much as possible.

2.5Print Delivery

(1)With the output tray opened

Tray capacity: Maximum 100 sheets (80g/m2), face-down only

(2)With the output tray closed

Tray capacity: 1 sheet (80g/m2), face-down only

Note:
￿Face down:	Deliver the printed face of the paper downward.
Environment :	23°C

I-5