Brother HL-820, HL-1020, HL-1040 manual Alarm Indications AT a Glance, Operator Calls

ALARM INDICATIONS AT A GLANCE

Operator Calls

If a recoverable error occurs, the printer indicates an ‘operator call’ by blinking th e Alarm lamp and any of the following lamps.

Find the error and take the proper action to correct it. The printer automatically recovers from most errors, but you may need to reset the printer with the panel switch as described below.

Blinking Lamp	Error	Action
Paper ❍↔●	Paper jam	Clear the paper jam referring to the next section “PAPER
Alarm❍↔●		JAMS” and press the panel switch if the printer does not
		automatically resume printing.
	Paper empty	Load paper in the printer referring to the On-Line user’s
		guide Chapter 2 and press the panel switch.
	Misfeed	Reinstall the paper and press the panel switch.
Toner ❍↔●	Toner low	Indicates that the printer has approximately 100 pages of
Alarm❍↔●		printing left before the toner cartridge is empty. Prepare a
(every 5 seconds)		new toner cartridge.
Toner ❍↔●	Toner Empty	Replace the toner cartridge with a new one referring to the
Alarm❍↔●		On-line user’s guide Chapter 5.
(Fast blinking)

- 30 -