Lantronix MPS1-2, MPS1-T, MPS100 Troubleshooting Power-Up Troubleshooting, Table B-1Error Messages

Troubleshooting

B - Troubleshooting

B.1 Power-Up Troubleshooting

There are several possible error situations if the LEDs do not ßash.

Table B-1:Error Messages

Message	Diagnosis/Remedy
Power-up diagnostic failure (hardware	Note which LED is blinking and its color, then contact
failure)	your dealer or Lantronix Technical Support.
The Server boots but does not try to	Press the Test button. A brief description of the problem
load the Flash ROM code	will be queued to the parallel port and printed.
Network Error: The ACT LED will blink	A. Make sure the Ethernet network cable is properly
yellow 2-3 times per second	connected and reboot the server.
	B. If option A fails to resolve the problem, reload Flash
	ROM. See Appendix D.

B - 1