Lantronix MPS1-2, MPS1-T manual Table F-1Frequently-used Server Commands, Define Server Login Password

			Frequently-used Commands
	Table F-1:Frequently-used Server Commands, cont.
Command		Option(s)	Description
DEFINE SERVER IPADDRESS ipaddress			Sets the ServerÕs network IP address.
DEFINE SERVER LOADHOST ipaddress			SpeciÞes the TCP/IP host from which the Server
			requests its run-time code.
DEFINE SERVER LOGIN PASSWORD			Sets a new password that will be required before
			incoming logins are accepted. You will be
			prompted for the new password (up to 6
			alphanumeric characters, case-insensitive).
DEFINE SERVER NAME “newname”			SpeciÞes a new name for the Server. Names are
			restricted in length; generally a name of 11 or
			fewer characters is permissible.
DEFINE SERVER NETWARE LOADHOST server			SpeciÞes the NetWare host from which the
			Server requests its run-time code. Enter a Þle
			server name of up to 11 characters.
DEFINE SERVER PRIVILEGED PASSWORD			Sets a new password that will be required for
			privileged user status. You will be prompted for
			the new password (up to 6 alphanumeric
			characters, case-insensitive).
DEFINE SERVER RARP {ENDIS}			Enables or disables querying for a RARP host at
			system boot time.

F - 3