Manhattan Computer Products 451123, 451109 user manual

Page 6

3.The drive case’s SATA cable supports 3.5-inch drives. Attach the power and SATA cables from the drive case to the drive. The power connector is “D”-shaped to help orient the connector correctly.

NOTE: In order to install a 2.5-inch drive, you need a 44-pin-to-40-pin connector adapter.

4.Carefully position the drive inside the drive case

5.Secure the drive in place using the supplied mounting screws. Use the mounting holes on the sides or bottom, depending on the design of the drive.

6.Slide the drive case cover back on. The hardware installation is now complete; the drive case is ready to use.



Page 5 Page 7
Image 6
Page 5 Page 7
Contents Models 451109 Package Contents IntroductionSystem Requirements Connector Hardware installationKey lock Drive Activity LED Power LED Sata DataInstalling the Docking Case Mounting a Drive in the Drive Case Drive functional in the systemPage Specifications Hot-Swapping
Top Page Image Contents